Yaesu FT-2200 Radio Mobile Transceiver Microphone Users Guide

Yaesu user’s guide for Radio Mobile Transceiver model FT-2200. Free PDF Service Owner’s Manual Download.

Features
• 9 Memories
• CTCSS Encoder
• Large LCD
• Auto Power Off
• Self adjusting LCD
• Lock
• Automatic Repeater Shift
• DTMF Memories (7)
• Scanning
• Optional Digital Voice

Contents

FT-2200
Mobile Transceiver 2-m, 50 Watt Instruction Manual Transceptor M6vil 2-mts,. 50- Watt Manual De Instrucciones
Transceiver Mobile bande 2 mavec Paging 50 W,

Features

Specifications.
Controls & Connectors Installation
Base Station Installation Accessories
Table of Contents
CTCSS “Bell” Paging w/FTS-27 261 DTMF Paging & Code Squelch 272 Storing Code Memories 29

3 Page Code Inhibit 30
7 Paging & Code Squelch Operation 31
9 Special Paging Fnctions 33
10 DTMF Auto-Dial Memories 35
Operation 11
Ringer Settings 36
Preliminary Setup
Frequency Selection Modes
Channel Step Selection
Transmitting
Time-Out Timer
Repeater Splits
Automatic Repeater Shift
Simple Memory Storage & Recall
Odd-Split Memories
CALL Channel Memory
Separate Tx Frequency Memories
Memory Tuning
Masking Memories
Scanning
Programmable Memory Scanning & Tuning
Priority Channel Monitoring
CTCSS Operation
11 Composing your own Ringer Alert Melody 36
13 Memory-Only Mode 37
14 Digital Voice System Operation w/DVS-3 Option 39
15 Voice System Display 39
15 Segmentation Code Selection Notes 41
16 On-the-air Recording & Playback 43
17 DVS-3 Remote Operation 43
18 In Case ofProblems ….47
19 Resetting the CPU & Memory Backup48
19 Packet Radio TNC Interconnections48
20 CAT System Computer Control.49 20 CAT Programming Instructions 50
21 Installation of Options 5221 DVS-3 5222 FTS-27 5424 FT-2200 Quick Reference Guide 5525

The Yaesu Ff-2200 is a compact, full-featured radio providing selectable power output of 5, 25 or 50-Watts, and includes many convenient operating functions.

Forty nine tunable memories offer flexible programming and scanning functions, such as oddsplit Tx/Rx frequencies, programmable repeater offset and scan limits, selectable scan resume modes and memory skip, priority channel monitoring and instant-recall CALL channel. Channel steps are user-selectable from 5 to 50 kHz, and ARS (Automatic Repeater Shift) can be activated to automatically set standard repeater shifts when tuning to repeater subbands. Backlighting for the large LCD (display), knobs and major buttons is controlled using a photo-sensor to automatically adjust to ambient light conditions.

A 38-tone programmable CTCSS encoder is built-in, and the FTS-27 CTCSS decoder unit can be installed to provide squelched private channels and a CTCSS Bell feature to sound an alert tone when the tone squelch opens.

DTMF (Dual-Tone, Multi-Frequency)-based selective calling and private paging lets you select any of 999 3-digit ill codes for your transceiver and then have your receiver stay quiet until your code is received (from any standard DTMFequipped transceiver). When a call is received, the IT-2200 displays the caller’s code, and a paging beeper can be set to sound. With the AutoPage/Forward features, your FT-2200 can respond automatically by acknowledging or relaying a page call received when you are not present. Seven DTMF code memories store your ill plus those of six other frequently-called stations or groups you wish to monitor. In addition, 10 DTMF Autodial memories store up to 15 digits each for quick playback of commonly used numbers.

The optional DVS-3 permits digital voice recording and playback in the IT-2200. For remote operation, the optional MW-2 Wireless remotecontrol unit duplicates most front-panel controls (including volume and squelch), adding a DTl\1F keypad and microphone. A tiny panel plugs into the microphone jack of the radio to receive commands from the unit. The microphone jack also includes signal for CAT System control from an external personal computer.
Please read this manual carefully to familiarize yourself with the Ff-2200 features.
General

Frequency Range: See Version Chart Below Channel Steps: 5, 10, 12.5, 15, 20, 25 & 50 kHz Frequency Stability: < ±10 ppm (-10 to +50°C) Mode of Emission: G3E Antenna Impedance: 50-0, unbalanced Supply voltage: 13.8V DC ± 10%, negative ground Current Consumption (typical): Rx: 700 rnA, Tx hi/med./low: 1O/6/3A Operating Temperature Range: -20 to +60 °C Case Size (WHD): 140 x 40 x 160 nun (w/o knobs) Weight: approx. 1.25 kg (2.8Ib) VERSION 81 A2 A3 83 144-146) (Rx: 140-174 )(Range Tx: 140-150(MHz) 140-174 )(1750 Hz) (Tone Burst Transmitter) Output Power (high/med./low): 50/25/5W Modulation Type: Variable Reactance Maximum Deviation: ±5 kHz Spurious Radiation: less than --60 dB Microphone Impedance: 2kO electret condenser Receiver Wikipedia's page for Yaesu
Company Web Site for : Yaesu